[. . . ] CARPET LINER CARE AND USE INSTRUCTIONS
Your new 3D ® carpet liners are custom molded to fit your vehicle. [. . . ] Do not use solvent-based cleaners or cleaners containing bleach as these may discolor your carpet. Your 3D® carpet liners come with a lifetime warranty against tearing and cracking. For warranty information or to see other products we have available for your vehicle, please see our web site, http://www. huskyliners. com.
ALIGNMENT VIEW SHOWING PLACEMENT OF YOUR 1997-2003 FORD F150 SUPER CAB/1997-1998 F250 LT. DUTY SUPER CAB REAR SEAT 3D CARPET FLOOR LINER
FRONT OF VEHICLE
FOR REFERENCE, PART NUMBER MOLDED ON BACK SIDE OF LINER
9174_Insert X 2. doc 12/30/02
CARPET LINER INSTALLATION INSTRUCTIONS
Your new 3D® Carpet Liners are designed to be held firmly in place with a Velcro® anchoring system. You will find that your second seat liner comes with two Velcro® "hook" patches applied to the underneath surface of the liner. In the hardware bag included in the shipping container you will find 2 anchor screws with the "loop" portion of the Velcro® applied. The anchor screws will need to be installed in your factory carpet directly beneath the Velcro® hook patches to hold the liners in place. The anchor screws will not damage your carpet and can easily be removed if necessary. [. . . ] ·Insert a straight pin (needle) next to the point where the anchor screw contacts the carpet to mark the screw location.
Velcro® Dot on back of liner.
Anchor screw shown attached to Velcro® Dot on back of liner.
Anchor screw will pierce masking tape, marking screw location.
With screw secured in carpet, align Velcro® halves to secure liner in place.
9174_Insert X 2. doc 12/30/02 [. . . ]